METABO HPT 1-1/2-IN SPLINE VARIABLE SPEED CORDED ROTARY HAMMER DRILL
The 1-1/2 Inch Spline Shank Rotary Hammer (DH38YE2) is the next generation in Metabo HPT hammer technology. Compared to its predecessor the DH38YE, the DH38YE2 packs power into a more ergonomic body that is 2.9 lbs lighter, while delivering less vibration and a lower noise level. The DH38YE2 is designed for drilling holes in concrete for anchors or rebar, demolishing and chiseling concrete, cutting, digging, tamping or driving ground rods.
POWERFUL: 8.4 Amp motor delivers 950 watts of input power for maximum productivity
IMPACT: 5.9 ft/lbs of impact energy for faster drilling and chiseling through concrete
LIGHTWEIGHT: At only 14.1 lbs
DUEL MODES: Two modes of operation – hammer only and hammer drilling controlled by the simple turn of a knob
LOW VIBRATION: Levels of only 18.8m/s2 (full load) for more comfortable operation in hand
LOW NOISE: Only 95.2 dB (full load) for a less noisy work environment
SAFETY CLUTCH: Shuts down rotation in the event of a bound bit for improved user protection
DUST RESISTANT: Cover protects the tool from dust and debris and prolongs tool life
BRUSHES: Auto-stop carbon brushes prevent motor damage and are accessible for simple maintenance checks
Weight: 22 lb.
Single impact energy: 10.7 ft-lbs
Hammer drilling diameter range: 15/32 – 2-5/32 in
Optimum Hammer drilling range: 25/32 – 2-5/32 in
Hammer drilling RPM: 245 rpm
Full hammering frequency: 2830 impacts/minute
Functionality: Active Torque Control (ATC), Chiseling, Power reduction, Active Vibration Reduction (AVR)
Triaxial vibration value for hammer drilling into concrete (ah,HD): 8.3 m/s² 1
Dust removal system available: TE DRS-Y, TE DRS-D
Share this with your friends:
